Skip navigation

Waseem Haider

​​​​​Photo of Ahmed AbdelgawadAssistant Professor
Mechanical & Materials Engineering 
ET Building 141
989-774-1125
View The Haider Research Group Website HERE
​​
Education
  • Ph.D., Mechanical Engineering, Florida International University, USA, 2010
  • M.S., Materials Engineering, Tampere University of Technology, Finland, 2006
  • B.S., Metallurgical and Materials Engineering, Middle East Technical University, Turkey, 2003​
Professional Interests
  • Titanium Oxide Nanoparticles/Nanotubes
  • Thin Films
  • Graphene Based Nanocomposites
  • Magnetic properties of Iron Oxide
  • Piezoelectric Materials
  • Biomaterials
  • Surface Engineering
  • Photocatalysis
  • Electrochemistry


​​Selected Publications
  1. H. Asgar, K.M. Deen, U. Riaz, Z. Rahman, U. H. Shah, W. Haider, Synthesis of graphene via ultra-sonic exfoliation of graphite oxide and its electrochemical characterization, Materials Chemistry and Physics: Volume 206 (2018) pp. 7-11.
  2. M. M. Khan, A. Nemati, Z. Rahman, U. H. Shah, H. Ansgar, W. Haider, Recent Advancements in Bulk Metallic Glasses and Their Applications: A Review. (2017) https://doi.org/10.1080/10408436.2017.1358149.
  3. S. Khalajabadi, A. Abu, N. Ahmad, M. Yajid, N. Redzuan, R. Nasiri, W. Haider, I. Noshadi, Bio-corrosion behavior and mechanical characteristics of magnesium-titania-hydroxyapatite nanocomposites coated by magnesium-oxide flakes and silicon for use as resorbable bone fixation material, Journal of the Mechanical Behavior of Biomedical Materials: Volume 77 (2018) pp. 360–374
  4. U. H. Shah, Z. Rahman, K. M. Deen, H. Asgar, I. Shabib, W. Haider, Investigation of the formation mechanism of titanium oxide nanotubes and its electrochemical evaluation, Journal of Applied Electrochemistry: Volume 47, Issue 10 (2017) pp. 1147-1159.
  5. U. H. Shah, K. M. Deen, H. Asgar, Z. Rahman, W. Haider, Understanding the mechanism of TiO2 nanotubes formation at low potentials (≤ 8 V) through electrochemical methods, Journal of Electroanalytical Chemistry, Volume 807 (2017) pp. 228–234.
  6. MA Makhdoom, A Ahmad, M Kamran, K Abid, W Haider, Microstructural and Electrochemical behavior of 2205 Duplex Stainless Steel Weldments, Surfaces and Interfaces: Volume 9 (2017) pp. 189-195.
  7. S. Khalajabadi, A. Abu, N. Ahmad, M. Kadir, A. Ismail, R. Nasiri, W. Haider, N. Redzuan, Biodegradable Mg/HA/TiO2 Nanocomposites Coated with MgO and Si/MgO for Orthopedic Applications: A Study on the Corrosion, Surface Characterization, and Biocompatability, Coatings: Volume 7 Issue 10 (2017),154 pp. 1-24.
  8. Zia ur Rahman, K.M. Deen, Lawrence Cano, Waseem Haider, The effects of parametric changes in electropolishing process on surface properties of 316L stainless steel, Applied Surface Science 410 (2017) pp. 432–444
  9. U.H. Shah, K.M. Deen, Z. Rahman, H. Asgar, W. Haider, Peculiar behavior of TiO2 tubular structure for water reduction in dark and under natural light exposure, Materials Letters 198 (2017) pp. 188–191
  10. S. Khalajabadi, N. Ahmad, S. Izman, A. Abu, W. Haider, M. Kadir, "In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications" Journal of Alloys and Compounds: Volume 696, (2017) pp. 768-781.
  11. M. Abu-Shams, W. Haider, and I. Shabib, "Evolution of displacement cascades in Fe-Cr structures with different [001] grain boundaries". Radiation Effects and Defects in Solids.
  12. F. Muhammad A. Ahmad, A. Farooq, W. Haider, "Effect of post weld heat treatment on mechanical and electrochemical properties of X2CrNiMo17-13-2 stainless steel", Journal of Materials Engineering and Performance: Volume 25, Issue 10 (2016) pp. 4283-4291.
  13. Z. Rahman, I. Shabib, and W. Haider, "Surface characterization and cytotoxicity analysis of plasma sprayed coatings on titanium alloys" Materials Science and Engineering C 67 (2016) pp. 675–683.
  14. Z. Rahman, L. Pompa, W. Haider, Electrochemical characterization and in-vitro bio-assessment of AZ31B and AZ91E alloys as biodegradable implant materials, Journal of Materials Science: Materials in Medicine 26 (2015) 217.
  15. Z. Rahman, W. Haider, L. Pompa, K. Deen, “Electrochemical and Osteoblast Adhesion Study of Engineered TiO2 Nanotubular Surfaces on Various Titanium Alloys” Materials Science and Engineering C 58 (2016) pp. 160-168.
  16. L. Pompa, Z. Rahman, E. Munoz, W. Haider, “Surface Characterization and Cytotoxicity Response of Biodegradable Magnesium Alloys” Materials Science and Engineering C: (2015) DOI: 10.1016/j.msec.2015.01.017.
  17. P. Gill, V. Musaramthota, N. Munroe, A. Datye, R. Dua, W. Haider, A. McGoron, R. Rokicki, “Surface Modification of Ni-Ti Alloys for Stent Application after Magnetoelectropolishing” Materials Science and Engineering C: (2015) DOI: 10.1016/j.msec.2015.01.009.
  18. R. Rokicki, W. Haider, S. Maffi, “Hemocompatibility Improvement of Chromium Bearing Bare Metal Stent Platform After Magnetoelectropolishing”, Journal of Materials Engineering and Performance: Volume 24, Issue 1 (2015) pp. 345-352.
  19. C. Pulletikurthi, N. Munroe, D. Stewart, W. Haider, S. Amruthaluri, R. Rokicki, M. Dugrot, S. Ramaswamy, Utility of Magneto-electropolished Ternary Nitinol Alloys for Blood-Contacting Applications”, Journal of Biomedical Materials Research Part B: Applied Biomaterials: (2014) DOI: 10.1002/jbm.b.33317.
  20. M. Rizwan, A. Ahmad, K. M. Deen, W. Haider, “Electrochemical Behavior and Biological Response of Mesenchymal Stem Cells on cp-Ti after N-ions Implantation”, Applied Surface Science: Volume 320 (2014) pp. 718-724.
  21. A. Farooq, K. M. Deen, M. A. Raza, R. Ahmad, A. Salam, I. H. Khan, W. Haider, “Peculiar Corrosion Behavior of SS316L in Simulated Cooling Water at Various pH”, Material Performance: Volume 53 No.10 (2014) pp. 44-47.​
  22. K. M. Deen, A. Farooq, M. A. Raza, W. Haider, Effect of Electrolyte Composition on TiO2 Nanotubular Structure Formation and its Electrochemical Evaluation”, Electrochimica Acta: Volume 117 (2014) 329-335.
  23. K. M. Deen, A. Farooq, M. A. Raza, R. Ahmad, W. Haider, "Estimating the Degradation of Methylethionium Chloride Dye on Nanotubular TiO2 Structure", Journal of Industrial and Engineering Chemistry (2014). http://dx.doi.org/10.1016/j.jiec.2014.07.003.
  24. Z. Rahman, L. Pompa, W. Haider, Influence of Electropolishing and Magnetoelectropolishing on Corrosion and Biocompatibility of Titanium Implants, Journal of Materials Engineering and Performance: Volume 23, Issue 11 (2014) pp. 3907-3915
  25. R. Rokicki, W. Haider, T. Hryneiewicz, “Influence of Sodium Hypochlorite Treatment of Electropolished and Magnetoelectropolished Nitinol Surfaces on Adhesion and Proliferation of MC3T3 Pre Osteoblast Cells”, Journal of Materials Science: Materials in Medicine: Volume 23, (2012) pp 2127-2139.

CMU, is an AA/EO institution, providing equal opportunity to all persons, including minorities, females, veterans, and individuals with disabilities.
Copyright Central Michigan University, Mount Pleasant, Mich. 48859 | Phone 989-774-4000 | Privacy Policy | Website Feedback | Desktop View