Daniel M. Chen
Daniel M. ChenProfessor
Mechanical Engineering
ET Building 130D
989-774-6538



Education
  • Ph.D., Mechanical Engineering, Kansas State University, 1984
  • M.S., Mechanical Engineering, South Dakota School of Mines & Technology, 1979
  • B.S., Mechanical Engineering, Taipei Institute of Technology, 1974
Affiliations
American Society for Engineering Education; American Society of Mechanical Engineers; Registered Professional Engineer, State of Michigan (since 1986)
Professional Interests
Kinematics/Dynamics, Machine Design, CAD/CAE
Teaching Areas
Engineering Mechanics, Mechanics of Materials, Kinematics & Dynamics of Machines, Machine Design, Computer-Aided Design and Engineering
Selected Publications and Presentations
  • Chen, D., Interactive Dynamic Analysis Using Constraint-Based Approach,International Journal on Interactive Design and Manufacturing, Vol. 5, No. 4, 2011. (DOI: 10.1007/s12008-011-0123-y).
  • Chen, D., Ravindran, A. and Vishwabrahmanasaraf, P., Reverse Engineering Closely-spaced Free-form Shapes for a Fabric-over-body Model, Journal of Engineering, Vol. 3, No. 10, October 2011.
  • Chen, D., Constraint-Based Three-Dimensional Kinematic Analysis, Journal of Engineering Technology, Vol. 28, No. 1, Spring 2011.
  • Olumolade, O., Chen, D. and Chen, H., Design Prototyping for Manufacturability,International Journal of Modern Engineering, Vol. 10, No. 2, Spring/Summer 2010.
  • Soni, K., Chen, D. and Lerch, T., Parameterization of Prismatic Shapes and Reconstruction of Free-form Shapes in Reverse Engineering, International Journal of Advanced Manufacturing Technology, Vol. 41, Issue 9, 2009. (DOI: 10.1007/s00170-008-1550-1).
  • Chen, D., Constraint-Based Mechanism Analysis of a Robot Gripper, Journal of Engineering Technology, Vol. 25, No. 2, Fall 2008.
  • Chen, M., Peng, A. and Sun, Y., A Joint Educational Feeder Program, 2008 ASEE (American Society for Engineering Education) Annual Conference Proceedings, Pittsburgh, PA, June 22-25, 2008.
  • Chen, M., Chan, M. and Wilson, D., Integrating CAD/CAM and Composite Tooling Technologies in a Research Experience, 2007 ASEE Annual Conference Proceedings, Honolulu, HI, June 24-27, 2007.
  • Chen, D., “Synthesis of Planar Mechanisms Using A Constraint-Based Design Tool”,2006ASEE (American Society for Engineering Education) Annual Conference Proceedings, Chicago, IL, June 18-21, 2006.
  • Chen, D., “Integrating CAD/CAM/CAE in Mechanical Engineering Technology Program”, Proceedings of International Symposium on Modern Technology and Management Science, North China University of Technology, Beijing, China, September 1-4, 2005.
  • Chen, D., Peng, A. and Jones, D., “Attitude of Students Entering Engineering Technology Programs”, 2004 ASEE Annual Conference Proceedings, Salt Lake City, Utah, June 2004.
  • Rodrigues, P. and Chen, D., “Methodologies in Teaching Mechanism Design”, ASEE New England Section Conference, University of Maine, Orono, ME, May 2-3, 2003.
  • Chen, D., “3D CAD Analysis of Space Trusses Based on Parallelepiped Method”,Engineering Design Graphics Journal, Volume 66, Number 1, Winter 2002.​